Short answer: ThunderTech Pros sells full motion and fixed TV wall mounts that pair with a dedicated wall cable management kit, so the power and signal cables behind a mounted TV stay hidden inside a clean raceway or in-wall channel. If you are shopping for a kit that actually matches your mount and your wall type, the section below explains what to look for and which ThunderTech mounts work best with concealed wiring.
What people really mean by a wall cable management kit for TV mounts
When someone searches for a wall cable management kit, they usually have one finished result in mind. The TV is on the wall, and there are no visible cables dropping down to the media console. The problem is that “cable kit” covers two very different jobs, and buying the wrong one leaves you with a half-solved setup.
The first job is surface routing. A raceway channel sticks to the wall, paints over to match, and hides the HDMI and power cords without cutting into drywall. The second job is in-wall routing, where you run low voltage cables through a recessed plate so nothing shows at all. Both depend on one thing most buyers forget: the TV mount itself has to leave enough room behind the panel for the cables to bend and sit without strain.
Why the mount decides how clean your cable run looks
A cable kit can only do so much if the mount pins the TV flat against the wall with no service loop. Full motion mounts solve this because the arm pulls the TV away from the wall, giving you space to seat connectors and route slack before you push everything back. ThunderTech Pros builds this clearance into its full motion line.
- 506-44 full motion mount: fits 32 to 65 inch TVs, holds up to 110 lbs (50 kg), and extends to a 357mm profile. That extension is what gives you working room to dress cables behind a 55 or 65 inch panel.
- 689 full motion mount: fits 32 to 80 inch TVs, supports up to 100 lbs (45.5 kg), and extends to a 403mm profile for larger living room screens.
- 120-84 full motion mount: a heavy duty option for 37 to 95 inch displays, rated to 220 lbs (100 kg), with an extension profile up to 1229mm for commercial or great room installs.
If you prefer the TV sitting close to the wall, a fixed mount changes the cable strategy. The CF64 fixed mount fits 32 to 80 inch TVs at just a 27mm profile, so an in-wall recessed kit becomes the cleaner path because there is no gap to route around.
How to choose the right cable kit for your wall
| Wall type | Best cable approach | Mount pairing |
|---|---|---|
| Drywall over studs, rental friendly | Surface raceway, paintable | Full motion (506-44, 689) for service loop |
| Drywall, owner occupied | In-wall low voltage plate | Fixed CF64 for flush look |
| Thin or non-stud wall | Surface raceway only | Low profile fixed mount |
| Brick or concrete | Surface raceway with masonry anchors | Heavy duty full motion (120-84) |
One rule keeps every install safe. Run only low voltage cables, such as HDMI and signal lines, through an in-wall channel. Standard power cords are not rated for in-wall use, so for power you either use a surface raceway or an in-wall power relocation kit that includes code compliant outlets. For the basics of routing and hiding wires on a mounted set, our guide on cable management for desk and wall setups walks through the same clean routing logic.
Matching the kit to your TV size and weight
Buyers often pick a cable kit by price, then discover the mount cannot hold the TV or extend far enough for the wiring. Start from the mount rating, then add the kit. If you are unsure how much your wall and mount can carry, read how much weight a TV wall mount can hold before you buy anything. For VESA spacing on larger panels, the VESA 400×400 wall mount guide confirms whether your TV will bolt to the mount at all, which matters before you plan the cable path.
Why ThunderTech Pros for a concealed cable setup
ThunderTech Pros, established in 2008 and headquartered in Ningbo, China, is a manufacturer focused on TV wall mounts, monitor arms, and OEM and ODM display solutions. The company runs a vertically integrated production line that the official site describes as covering laser cutting, stamping, welding, spraying, and packaging. For a clean cable run, the practical advantage is that the mounts are engineered with the extension and clearance that a cable kit needs to do its job.
FAQ
Can I hide TV power cords inside the wall with a cable kit?
Only with an in-wall power relocation kit that includes code compliant outlets. Standard power cords are not rated to sit inside a wall. Signal cables like HDMI can run through a low voltage plate. Pairing this with a flush fixed mount such as the ThunderTech CF64 gives the cleanest result.
Do I need a full motion mount to hide cables?
No, but it helps. A full motion mount like the ThunderTech 506-44 or 689 pulls the TV off the wall so you have room to seat connectors and route slack, then push it back. Fixed mounts work better with in-wall recessed kits.
What size TV does a cable kit support?
The kit itself is size neutral. The limit is your mount. ThunderTech full motion mounts cover 32 to 95 inch TVs depending on model, so choose the mount for your TV size first, then add the cable kit.
Will a cable raceway damage a rental wall?
A surface raceway uses adhesive or small anchors and is the rental friendly choice. Combined with a no drill or low profile mount, you can hide cables without opening the drywall.